oyjpArt ACM/ICPC算法程序设计空间

// I am new in programming, welcome to my blog
I am oyjpart(alpc12, 四城)
posts - 224, comments - 694, trackbacks - 0, articles - 6

PKU1511 Invitation Cards

Posted on 2007-01-02 16:10 oyjpart 阅读(1585) 评论(2)  编辑 收藏 引用 所属分类: ACM/ICPC或其他比赛

Invitation Cards
Time Limit:3000MS  Memory Limit:65536K
Total Submit:241 Accepted:93

Description
In the age of television, not many people attend theater performances. Antique Comedians of Malidinesia are aware of this fact. They want to propagate theater and, most of all, Antique Comedies. They have printed invitation cards with all the necessary information and with the programme. A lot of students were hired to distribute these invitations among the people. Each student volunteer has assigned exactly one bus stop and he or she stays there the whole day and gives invitation to people travelling by bus. A special course was taken where students learned how to influence people and what is the difference between influencing and robbery.

The transport system is very special: all lines are unidirectional and connect exactly two stops. Buses leave the originating stop with passangers each half an hour. After reaching the destination stop they return empty to the originating stop, where they wait until the next full half an hour, e.g. X:00 or X:30, where 'X' denotes the hour. The fee for transport between two stops is given by special tables and is payable on the spot. The lines are planned in such a way, that each round trip (i.e. a journey starting and finishing at the same stop) passes through a Central Checkpoint Stop (CCS) where each passenger has to pass a thorough check including body scan.

All the ACM student members leave the CCS each morning. Each volunteer is to move to one predetermined stop to invite passengers. There are as many volunteers as stops. At the end of the day, all students travel back to CCS. You are to write a computer program that helps ACM to minimize the amount of money to pay every day for the transport of their employees.

Input
The input consists of N cases. The first line of the input contains only positive integer N. Then follow the cases. Each case begins with a line containing exactly two integers P and Q, 1 <= P,Q <= 1000000. P is the number of stops including CCS and Q the number of bus lines. Then there are Q lines, each describing one bus line. Each of the lines contains exactly three numbers - the originating stop, the destination stop and the price. The CCS is designated by number 1. Prices are positive integers the sum of which is smaller than 1000000000. You can also assume it is always possible to get from any stop to any other stop.

Output
For each case, print one line containing the minimum amount of money to be paid each day by ACM for the travel costs of its volunteers.

Sample Input

2
2 2
1 2 13
2 1 33
4 6
1 2 10
2 1 60
1 3 20
3 4 10
2 4 5
4 1 50

Sample Output

46
210

Source
Central Europe 1998

这个题目我想就是专考Dijkstra()的堆写法吧 中间我采用的逆转有向边的写法 可以把从多点到单源的最短路径用单源到多点的最短路径的方法求出。
中间出了一个很隐蔽的错误 在一个i, j的双层循环中 内层循环写成了i++...结果调了很久。。。
总算过了 发现STL占内存是直接写邻接表的2倍左右,这也印证了vector的扩张方式。

  1 Solution:
  2 // by Optimistic
  3 #include  < stdio.h >
  4 #include  < string .h >
  5 #include  < vector >
  6 using   namespace  std; 
  7
  8 const   int  MAXINT  =   200000000 ;
  9 // const double INF = 10e100;
 10 // const double EPS = 10e-6; 
 11
 12 const   int  N  =   1000010 ;
 13 int  nv, ne;
 14 typedef  struct { int  jj, w;} Vtx;
 15 vector < Vtx >  adj[N];
 16 vector < Vtx >  adj2[N];
 17 typedef  struct { int  k, no;} hNode;
 18 int  ntc, hs;
 19 hNode h[N]; 
 20
 21 bool   operator   <  ( const  hNode &  a,  const  hNode &  b) 
 22 {
 23   return  a.k  <  b.k;
 24 }
 
 25
 26 void  push(hNode t)
 27 {
 28   int  i  =   ++ hs;
 29   while (i  >   1   &&  t  <  h[i >> 1 ])  {
 30   h[i]  =  h[i >> 1 ];
 31   i  >>=   1 ;
 32  }

 33  h[i]  =  t;
 34 }
 
 35
 36 void  pop()
 37 {
 38  hs -- ;
 39   int  i  =   1 , ic  =   2 ;
 40   while (ic  <=  hs)  {
 41    if (ic + 1   <=  hs  &&  h[ic + 1 <  h[ic]) ic ++ ;
 42    if (h[hs + 1 <  h[ic])  break ;
 43   h[i]  =  h[ic];
 44   i  =  ic;
 45   ic  <<=   1 ;
 46  }

 47  h[i]  =  h[hs + 1 ];
 48 }
 
 49
 50 int  Dijkstra()
 51 {
 52  hs  =   0 ;
 53   int  i;
 54   int   *  dist  =   new   int [nv];
 55   for (i  =   0 ; i  <  nv; i ++ ) dist[i]  =  MAXINT;
 56  hNode now;
 57  now.k  =   0 ; now.no  =   0 ;
 58  push(now);
 59   while ( 1 )
 60   {
 61    while (hs  >   0   &&  h[ 1 ].k  >  dist[h[ 1 ].no]) 
 62    pop();
 63    if (hs  ==   0 break ;
 64   now  =  h[ 1 ];
 65   pop();
 66    int  u  =  now.no;
 67   dist[u]  =  now.k;
 68    for (i  =   0 ; i  <  adj[u].size(); i ++ )
 69    {
 70     int  v  =  adj[u][i].jj;
 71     int  w  =  adj[u][i].w;
 72     if (dist[v]  >  dist[u]  +  w)
 73     {
 74     now.k  =  dist[u]  +  w;
 75     now.no  =  v;
 76     push(now);
 77     dist[v]  =  dist[u]  +  w;
 78    }

 79   }

 80  }

 81   int  ans  =   0 ;
 82   for (i  =   0 ; i  <  nv; i ++ )
 83   ans  +=  dist[i];
 84   return  ans;
 85 }
 
 86
 87 void  init()
 88 {
 89   int  i, u, v, w;
 90  Vtx x;
 91   // initiation
 92   for (i  =   0 ; i  <  nv; i ++ {
 93   adj2[i].clear();
 94   adj[i].clear();
 95  }

 96   // input
 97  scanf( " %d %d " & nv,  & ne);
 98   for (i  =   0 ; i  <  ne; i ++ {
 99   scanf( " %d %d %d " & u,  & v,  & w);
100   u -- ; v --
101   x.jj  =  v; x.w  =  w;
102   adj[u].push_back(x);
103  }

104   // pretreatment
105 }
 
106
107 void  Reverse()
108 {
109   int  i, j;
110  Vtx x;
111   for (i  =   0 ; i  <  nv; i ++ )
112   adj2[i].clear();
113   for (i  =   0 ; i  <  nv; i ++ )
114   {
115    for (j  =   0 ; j  <  adj[i].size(); j ++ )
116    {
117    x.jj  =  i;
118    x.w  =  adj[i][j].w;
119    adj2[adj[i][j].jj].push_back(x);
120   }

121  }

122   for (i  =   0 ; i  <  nv; i ++ )
123   {
124   adj[i].clear();
125    for (j  =   0 ; j < adj2[i].size(); j ++ )
126    adj[i].push_back(adj2[i][j]);
127  }

128 }
 
129
130 void  work()
131 {
132   int  x  =  Dijkstra();
133  Reverse();
134  x  +=  Dijkstra();
135  printf( " %d\n " , x);
136 }
 
137
138 int  main()
139 {
140 //  freopen("t.in", "r", stdin);
141  scanf( " %d " & ntc);
142   while (ntc -- )
143   {
144   init();
145   work();
146  }

147   return   0 ;
148 }
 
149

Feedback

# re: PKU1511 Invitation Cards   回复  更多评论   

2007-04-16 22:38 by bon
while (hs > 0 && h[ 1 ].k > dist[h[ 1 ].no]) pop();
请问这一句是什么意思?多谢!

# re: PKU1511 Invitation Cards   回复  更多评论   

2007-04-17 13:02 by oyjpart
72 if (dist[v] > dist[u] + w)
73 {
74 now.k = dist[u] + w;
75 now.no = v;
76 push(now);
77 dist[v] = dist[u] + w;
78 }
从这段代码中可以看到 在一次添加节点后 并没有按照常理对其他连接的可改进节点做修正(实际上是模版没有扩充修改一个节点的值然后维护堆性质的功能) 我们把那些旧的节点称为废节点的话 所以在选出dist最小的节点的时候要看看是不是废节点 如果是的就要不断POP出来
while (hs > 0 && h[ 1 ].k > dist[h[ 1 ].no]) pop();
应该很好理解了

只有注册用户登录后才能发表评论。
网站导航: 博客园   IT新闻   BlogJava   知识库   博问   管理