int CWnd::RunModalLoop(DWORD dwFlags)
{
ASSERT(::IsWindow(m_hWnd)); // window must be created
ASSERT(!(m_nFlags & WF_MODALLOOP)); // window must not already be in modal state
// for tracking the idle time state
BOOL bIdle = TRUE;
LONG lIdleCount = 0;
BOOL bShowIdle = (dwFlags & MLF_SHOWONIDLE) && !(GetStyle() & WS_VISIBLE);
HWND hWndParent = ::GetParent(m_hWnd);
m_nFlags |= (WF_MODALLOOP|WF_CONTINUEMODAL);
MSG* pMsg = &AfxGetThread()->m_msgCur;
// acquire and dispatch messages until the modal state is done
for (;;)
{
ASSERT(ContinueModal());
// phase1: check to see if we can do idle work
while (bIdle &&
!::PeekMessage(pMsg, NULL, NULL, NULL, PM_NOREMOVE))
{
ASSERT(ContinueModal());
// show the dialog when the message queue goes idle
if (bShowIdle)
{
ShowWindow(SW_SHOWNORMAL);
UpdateWindow();
bShowIdle = FALSE;
}
// call OnIdle while in bIdle state
if (!(dwFlags & MLF_NOIDLEMSG) && hWndParent != NULL && lIdleCount == 0)
{
// send WM_ENTERIDLE to the parent
::SendMessage(hWndParent, WM_ENTERIDLE, MSGF_DIALOGBOX, (LPARAM)m_hWnd);
}
if ((dwFlags & MLF_NOKICKIDLE) ||
!SendMessage(WM_KICKIDLE, MSGF_DIALOGBOX, lIdleCount++))
{
// stop idle processing next time
bIdle = FALSE;
}
}
// phase2: pump messages while available
do
{
ASSERT(ContinueModal());
// pump message, but quit on WM_QUIT
//PumpMessage(消息泵)的实现和上面讲的差不多。都是派送消息到窗口。
if (!AfxGetThread()->PumpMessage())
{
AfxPostQuitMessage(0);
return -1;
}
// show the window when certain special messages rec'd
if (bShowIdle &&
(pMsg->message == 0x118 || pMsg->message == WM_SYSKEYDOWN))
{
ShowWindow(SW_SHOWNORMAL);
消息分为队列消息(进入线程的消息队列)和非队列消息(不进入线程的消息队列)。对于队列消息，最常见的是鼠标和键盘触发的消息，例如 WM_MOUSERMOVE,WM_CHAR等消息；还有例如：WM_PAINT、WM_TIMER和WM_QUIT。当鼠标、键盘事件被触发后，相应的鼠标或键盘驱动程序就会把这些事件转换成相应的消息，然后输送到系统消息队列，由Windows系统负责把消息加入到相应线程的消息队列中，于是就有了消息循环(从消息队列中读取并派送消息)。还有一种是非队列消息，他绕过系统队列和消息队列，直接将消息发送到窗口过程。例如,当用户激活一个窗口系统发送 WM_ACTIVATE, WM_SETFOCUS, and WM_SETCURSOR。创建窗口时发送WM_CREATE消息。
BOOL CWinThread::PumpMessage()
{
ASSERT_VALID(this);
//如果是WM_QUIT就退出函数(return FALSE)，这将导致程序结束.
if (!::GetMessage(&m_msgCur, NULL, NULL, NULL)) {
#ifdef _DEBUG
if (afxTraceFlags & traceAppMsg)
TRACE0("CWinThread::PumpMessage - Received WM_QUIT.\n");
m_nDisablePumpCount++; // application must die
// Note: prevents calling message loop things in 'ExitInstance'
// will never be decremented
#endif
return FALSE;
}
#ifdef _DEBUG
if (m_nDisablePumpCount != 0)
{
TRACE0("Error: CWinThread::PumpMessage called when not permitted.\n");
ASSERT(FALSE);
}
#endif
#ifdef _DEBUG
if (afxTraceFlags & traceAppMsg)
_AfxTraceMsg(_T("PumpMessage"), &m_msgCur);
#endif
// process this message
if (m_msgCur.message != WM_KICKIDLE && !PreTranslateMessage(&m_msgCur))
{
::TranslateMessage(&m_msgCur); //键转换
::DispatchMessage(&m_msgCur); //派送消息
}
return TRUE;
}
BOOL CWinThread::PreTranslateMessage(MSG* pMsg)
{
ASSERT_VALID(this);
// 如果是线程消息，那么将会在消息映射表中找到消息入口，调用线程消息的处理函数
if (pMsg->hwnd == NULL && DispatchThreadMessageEx(pMsg))
return TRUE;
// walk from target to main window
CWnd* pMainWnd = AfxGetMainWnd();
if (CWnd::WalkPreTranslateTree(pMainWnd->GetSafeHwnd(), pMsg))
return TRUE;
// in case of modeless dialogs, last chance route through main
// window's accelerator table
if (pMainWnd != NULL)
{
CWnd* pWnd = CWnd::FromHandle(pMsg->hwnd);
if (pWnd->GetTopLevelParent() != pMainWnd)
return pMainWnd->PreTranslateMessage(pMsg);
}
return FALSE; // no special processing
}
注：1.一般用PostThreadMessage函数发送线程之间的消息，他和窗口消息不同，需要指定线程id,消息激被系统放入到目标线程的消息队列中；用 ON_THREAD_MESSAGE( message, memberFxn )宏可以映射线程消息和他的处理函数。这个宏必须在应用程序类(从CWinThread继承)中，因为只有应用程序类才处理线程消息。如果你在别的类(比如视图类)中用这个宏，线程消息的消息处理函数将得不到线程消息。
2.消息的目标窗口的PreTranslateMessage函数首先得到消息处理权，如果函数返回FALSE，那么他的父窗口将得到消息的处理权，直到主窗口；如果函数返回TRUE(表示消息已经被处理了)，那么就不需要调用父类的PreTranslateMessage函数。这样，保证了消息的目标窗口以及他的父窗口都可以有机会调用PreTranslateMessage,如果你想要消息不传递给父类进行处理的话，返回TRUE就行了
//对话框程序的消息循环
int CWnd::RunModalLoop(DWORD dwFlags)
{
ASSERT(::IsWindow(m_hWnd)); // window must be created
ASSERT(!(m_nFlags & WF_MODALLOOP)); // window must not already be in modal state
// for tracking the idle time state
BOOL bIdle = TRUE;
LONG lIdleCount = 0;
BOOL bShowIdle = (dwFlags & MLF_SHOWONIDLE) && !(GetStyle() & WS_VISIBLE);
HWND hWndParent = ::GetParent(m_hWnd);
m_nFlags |= (WF_MODALLOOP|WF_CONTINUEMODAL);
MSG* pMsg = &AfxGetThread()->m_msgCur;
// acquire and dispatch messages until the modal state is done
for (;;)
{
ASSERT(ContinueModal());
// phase1: check to see if we can do idle work
while (bIdle &&
!::PeekMessage(pMsg, NULL, NULL, NULL, PM_NOREMOVE))
{
ASSERT(ContinueModal());
// show the dialog when the message queue goes idle
if (bShowIdle)
{
ShowWindow(SW_SHOWNORMAL);
UpdateWindow();
bShowIdle = FALSE;
}
// call OnIdle while in bIdle state
if (!(dwFlags & MLF_NOIDLEMSG) && hWndParent != NULL && lIdleCount == 0)
{
// send WM_ENTERIDLE to the parent
::SendMessage(hWndParent, WM_ENTERIDLE, MSGF_DIALOGBOX, (LPARAM)m_hWnd);
}
if ((dwFlags & MLF_NOKICKIDLE) ||
!SendMessage(WM_KICKIDLE, MSGF_DIALOGBOX, lIdleCount++))
//发送WM_KICKIDLE消息，如果对话框中有状态栏或是工具栏等，靠这个消息更新状态，相当于OnIdle
{
// stop idle processing next time
bIdle = FALSE;
}
}
// phase2: pump messages while available
do
{
ASSERT(ContinueModal());
// pump message, but quit on WM_QUIT
//PumpMessage(消息泵)的实现和上面讲的差不多。都是派送消息到窗口。
if (!AfxGetThread()->PumpMessage())
{
AfxPostQuitMessage(0);
return -1;
}
// 消息为WM_SYSTIMER或者WM_SYSKEYDOWN,并且空闲显示标志为真的话，就显示窗口并通知窗口立刻重绘。
if (bShowIdle &&
(pMsg->message == 0x118 || pMsg->message == WM_SYSKEYDOWN))
{
ShowWindow(SW_SHOWNORMAL);
UpdateWindow();
bShowIdle = FALSE;
}
// 检测对话框是否还是模式状态，如果不是则退出
if (!ContinueModal())
goto ExitModal;
// reset "no idle" state after pumping "normal" message
if (AfxGetThread()->IsIdleMessage(pMsg))
{
bIdle = TRUE;
lIdleCount = 0;
}
} while (::PeekMessage(pMsg, NULL, NULL, NULL, PM_NOREMOVE));
} //无限循环
ExitModal:
m_nFlags &= ~(WF_MODALLOOP|WF_CONTINUEMODAL);
return m_nModalResult;
}
posted on 2008-09-02 23:16
黑色天使 阅读(608)
评论(0) 编辑 收藏 引用 所属分类:
VC&MFC